Instructions

1. Determine the place where you want to install the product. Mark the installation holes with a pencil after placing the product.
2. Drill the marked places with the appropriate drill bit.
3. Insert the wall plugs into these holes and place the wall plugs into the holes with a hammer.
4. Place the product at height where the installation holes will be on wall plugs.
5. Tighten the screws of wall plugs with a screwdriver or cordless drill.
6. The “HangHover” installation is completed.

 

How To Use

1.  The “HangHover” is closed before first use. Grasp it from connection point of wing tips and pull it to you with your fingers. They will be right angle to your body (90 degrees).
2.  Handles that will allow you to open the bars where you will hang clothes are just below the connection tip of wings. Bars will be opened when you hold these tips and pull them towards you. Open the wings as they will be right angle to your body (90 degrees) as you do in item 1.
3.  Hang your clothes 

 

Safety Procedures

1. Install it to height where the children under 6 will not be able to reach.
2. After you collect your laundry, don’t forget to close the product.
3. While the product is closed, do not hold on to the product and do not hang on the product.
4. When the product is open, do not hold or hang on to the wings.
5. Do not dismount hanger rods of the product.
6. Do not hold on to the hanger rods of the product and do not hang on these rods.
7. It is enough to clean the product with a damp cloth. After cleaning, dry it.